Frequently Asked Questions

NuVML can run stand-alone for production, but if you need virtual networks you need CML.

They are two separate products with no relationship, nuVML is a visualization product and CML is a virtualization product.

It is the only tool in the market that allows you to go inside the DNA and topology of the logical network.

Abstract virtual logical visualization of relationships between devices and simulated devices, such as routing protocols andvirtual connections, as they see them in the real production environment.

Can be used either in production or the lab for planning and designing networks, preparing low level design and high level design for customer, providing proof of concept network validation, side by side verification between production and simulation, educational purposes, and risk reducing for a major failure.

No, CML is required for simulation purposes.

Exclusively on Microsoft platform.

No, they have to be acquired directly from Cisco.

Operating System
- Microsoft: Windows 7, 8 and 10
- CPU i5, i7 and newer
- 64-Bit
- Microsoft.NET Framework 4
Processor
- 2.0 Ghz minimum, 4 core
Memory
- 16GB recommended
Hard Drive
- Client requires 100GB of storage
Video Card
- AMD Radeon / NVidia GeForce video card with DX11 or higher
Display Resolution
- We recommend Full HD using 1920x1080 at 32bit
- GUI will function at lower resolutions


Mac OS is not supported at this time.


TO CHECK YOUR SYSTEM AND HARDWARE FOLLOW THIS LINK

It has no web interface

Yes, for this you need to create a connector to the production and to the simulation.

NuVML and GNS3 are two separate products and cannot be compared when it comes to usage: GNS3 is freeware simulation and design tool and nuVML is visualization tool that can be connected to GNS3 or production network at the same time, also nuVML is fully integrated into CML and VIRL but GNS3 is not.

Large Enterprise customers, service providers, mobile providers, data center management, network operation center administrators, network architects, instructors and course material builders.

No we do not because is a corporate product, but smaller user license is 10 users.

Layer 1 to layer 7 using a sniffer module or nbar functionality.

All routing protocols can be visualized.

Yes, it can.

2d has limitation to see virtual network topology while 3d has full visibility.

Absolutely, nuVML has no restrictions on visualization of vendor.

Any images that can be used in CML or VIRL.

Yes we can.

Yes, it does, multi-vendor.

Need to contact sales support to request.

Using credit card or contacting sales support.

Yes it can.

Yes it can.

Yes.

Yes we support all Cisco product files.

Yes, importing allows visualization and simulation without Discovery in offline mode.

Through online documentation and forums.

Yes, please consult with sales support.

Yes, we can see inside virtualization but cannot control it.

Yes, only on CML and production sniffer.

Every 3 months.

Yes.